Cisco 8832 Administration Manual page 50

Network Setup Fields
Entry
TFTP Server 1
TFTP Server 2
DHCP Address Released
Table 7: IPv6 Setup Submenu
Entry
DHCPv6 Enabled
IPv6 Address
IPv6 Prefix Length
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
40
Type Default
No No
Yes
Type Default
Disabled Enabled
Enabled
Cisco IP Conference Phone Installation
Description
Primary Trivial File Transfer Protocol
(TFTP) server that the phone uses.
If you set the Alternate TFTP option to
On, you must enter a nonzero value for
the TFTP Server 1 option. If neither the
primary TFTP server nor the backup
TFTP server is listed in the CTL or ITL
file on the phone, you must unlock the
file before you can save changes to the
TFTP Server 1 option. In this case, the
phone deletes the file when you save
changes to the TFTP Server 1 option. A
new CTL or ITL file downloads from
the new TFTP Server 1 address.
See the TFTP notes after the final table.
Secondary TFTP server that the phone
uses.
If neither the primary TFTP server nor
the backup TFTP server is listed in the
CTL or ITL file on the phone, you must
unlock the file before you can save
changes to the TFTP Server 2 option.
In this case, the phone deletes the file
when you save changes to the TFTP
Server 2 option. A new CTL or ITL file
downloads from the new TFTP Server
2 address.
See the TFTP Notes section after the
final table.
Description
Enables or disables the use of IPv6
DHCP.
The IPv6 address of the phone.
To change this field, turn off DHCP.
Length of the IPv6 address.
To change this field, turn off DHCP.