Set Domain Name Field; Enable Wireless Lan From The Phone - Cisco 8832 Administration Manual

Set Domain Name Field

1. Any manually assigned IPv4 TFTP servers
2. Any manually assigned IPv6 servers
3. DHCP assigned TFTP servers
4. DHCPv6 assigned TFTP servers
For information about the CTL and ITL files, see the Cisco Unified Communications Manager Security Guide.
Set Domain Name Field
Procedure
Step 1 Set the DHCP Enabled option to No.
Step 2
Scroll to the Domain Name option, press Select, and enter a new domain name.
Step 3 Press Apply.

Enable Wireless LAN from the Phone

Ensure that the Wi-Fi coverage in the location where the wireless LAN is deployed is suitable for transmitting
voice packets.
A fast-secure roaming method is recommended for Wi-Fi users. We recommend that you use 802.11r (FT).
For complete configuration information, see the Cisco IP Phone 8832 Wireless LAN Deployment Guide at
this location:
https://www.cisco.com/c/en/us/support/collaboration-endpoints/unified-ip-phone-8800-series/
products-implementation-design-guides-list.html
The Cisco IP Phone 8832 Wireless LAN Deployment Guide includes the following configuration information:
• Wireless network configuration
• Wireless network configuration in Cisco Unified Communications Manager Administration
• Wireless network configuration on the Cisco IP Phone
Before you begin
Make sure that Wi-Fi is enabled on the phone, and the Ethernet cable is disconnected.
Procedure
Step 1 To enable the application, press Settings.
Step 2
Navigate to Admin settings > Network setup > Wi-Fi client setup > Wireless.
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
42
Cisco IP Conference Phone Installation