Cisco 8832 Administration Manual page 110

Product Specific Configuration
Field Name Field Type
Or Choices
Link Layer Discovery Disabled
Protocol - Media
Enabled
Endpoint Discover
(LLDP-MED): Switch
Port
LLDP Asset ID String, up to 32 characters
Energy Efficient Disabled
Ethernet(EEE): Switch
Enabled
Port
LLDP Power Priority Unknown
Low
High
Critical
802.1x Authentication User Controlled
Disabled
Enabled
Switch Port Remote Disabled
Configuration
Auto Negotiate
10 Half
10 Full
100 Half
100 Full
SSH Access Disabled
Enabled
Ring Locale Default
Japan
TLS Resumption Timer Integer 0–3600 seconds
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
100
Default Description
Enabled Enables LLDP-MED on the SW port.
Identifies the asset ID that is assigned to the phone for
inventory management.
Disabled Controls EEE on the switch port.
Unknown Assigns a phone power priority to the switch, thus
enabling the switch to appropriately provide power to
the phones.
User Controlled Specifies the 802.1x authentication feature status.
• User Controlled—The user can configure the
• Disabled—802.1x authentication is not used.
• Enabled—802.1x authentication is used, and you
Disabled Allows you to configure the speed and duplex function
of the phone SW port remotely. This enhances the
performance for large deployments with specific port
settings.
If the SW ports are configured for Remote Port
Configuration in Cisco Unified Communications
Manager, the data cannot be changed on the phone.
Disabled Controls the access to the SSH daemon through port
22. Leaving port 22 open leaves the phone vulnerable
to Denial of Service (DoS) attacks.
Default Controls the ringing pattern.
3600 Controls the ability to resume a TLS session without
repeating the entire TLS authentication process. If the
field is set to 0, then the TLS session resumption is
disabled.
Cisco IP Conference Phone Administration
802.1x on the phone.
configure the authentication for the phones.