User Manual
In Data Logging mode the display data from all active channels is
stored at each data point.
The data can be stored:
The data is stored in the internal memory or on a USB Flash Drive
connected to the Unit until the Data Logging is stopped.
3.1
SET-UP
Before starting, set all channels to the correct functions. (See
Chapter2). To access the Data logging function do the following:
DASHBOARD >>
•
FILENAME
Enter the filename (10 characters maximum).
Page 76 of 105
•
Periodically
•
Key press
Figure 3-2 Data logging Setup
DATA LOGGING>> SETUP
[EN] English – 109M4017 Revision -
Druck DPI612