GE Druck DPI612 User Manual page 83

User Manual
SCALING
ERROR TYPE - Selects how the deviation from the ideal transfer
LINEARITY -
TOLERANCE -
Page 83 of 105
Figure 4-2 Select Input Options
The scaling values are two pairs of values that define the
ideal transfer characteristic:
The maximum and minimum Reference signal values
(Reference High and Reference Low) and the
corresponding Input signal values (Input High and Input
Low).
characteristic is to be displayed. This can be one of the
following:
% Span - a percentage of the Input signal span.
% Rdg - a percentage of the Input signal reading.
The transfer characteristic from Reference to Input signal.
This can be one of the following:
Linear - a proportional response.
Square Root -
The test limits for the deviation from the transfer
characteristic.
often found in flow sensors.
[EN] English – 109M4017 Revision -
Druck DPI612