Table of Contents
Advertisement
User Manual
Figure 2-19 Calibration Window - Expanded View
The display options can be changed by pressing the channel the
user wants to display in expanded view.
Selecting
2.4.4
Example Procedures
a. Example Procedure: Measure or Source Current with internal
loop power
•
Page 64 of 105
displays all channels in the reduced view.
Figure 2-20 shows CH1 set-up to measure or source a
current with internal loop power.
Note: Loop drive is provided by connecting to the 2 red
terminals on the front of the DPI612 and enabling Current
(24V) as the electrical function.
[EN] English – 109M4017 Revision -
Druck DPI612
Advertisement
Table of Contents
