Remote Feature Access; Remote Access Password - Inter-Tel 5.2 Phone User Manual

R F
EMOTE EATURE
Remote Feature Access allows you to place your phone in do-not-disturb mode or for-
ward calls, either from another phone or through a special dial-up line. For your con-
venience, a pocket-sized guide is attached to the front of this guide.

Remote Access Password

This password is used for Remote Feature Access, as described below.
To change the password from your phone:
— Dial
3
— Enter your current password, followed by
extension number.)
— Enter the new password followed by
— Enter the new password again for verification followed by
mation tone.
To change the station password using remote programming: See the following sec-
tion.

Remote Feature Access

To access your phone from another phone:
— EITHER, call your Direct Inward System Access number (provided by your Sys-
tem Administrator). If required, enter your password.
OR, Use any phone on the system.
— Enter
— Enter your extension number.
— Enter your password followed by
tures.
To change the station password using Remote Programming:
•
Enter
•
Enter the new password, followed by
•
Enter the new password again for verification, followed by
To turn on do-not-disturb:
•
Enter
•
Enter message number (01-20) and, if desired, enter the optional second-line
message text.
To turn off do-not-disturb:
•
Enter
30
A
CCESS
.
9 2
.
3 5 9
.
3 9 2
.
3 7 0
.
3 7 1
. (At default, the password is your
#
. You hear a confirmation tone.
#
. You can now use any of the following fea-
#
.
#
Eclipse Associate Display and Basic Digital Phone User Guide
. You hear a confir-
#
.
#