Removing The File; Stand-Alone Mode: Operation Without The Dentsply Endo Iq; Application - Dentsply Sirona X-Smart IQ User Manual

Step by Step Instructions
6.6.2.2

Removing the File

N°
A
Press the pushbutton (
6.6.3 Stand-alone mode: operation without the
DENTSPLY ENDO IQ™ Application
The motor handpiece can be used without the iPad
DENTSPLY ENDO IQ™ application. This mode is called Stand-alone.
To activate Stand-alone mode:
• Connect the motor handpiece to the DENTSPLY ENDO IQ™
application.
See
• Choose one of the available Stand-alone modes.
See
See 6.6.1.1 for motor handpiece LED status in Stand-alone mode.
The motor handpiece must be activated with the DENTSPLY ENDO
IQ™ application to be used in Stand-alone mode.
Check the current settings of the stand-alone mode before using the
motor handpiece without the DENTSPLY ENDO IQ™ application,
see 6.7.5.1 Motor Handpiece Information and
31/74
3
) and pull out the file (
6.7.3 Connecting the Motor
6.7.5.1 Motor Handpiece Information and
Action
1
2
1
Handpiece.
B EN XSIQ DFU MAS / Rev.10 / 01-2017
).
3
®
and the
Settings.
Settings.