Description Of The Sounds; Stand-By Mode 1 - Dentsply Sirona X-Smart IQ User Manual

Step by Step Instructions
6.6.1.3

Description of the Sounds

Mode
Device running in
continuous rotation
Device running in
reciprocating
motion
Battery charge level
Motor START/STOP
button
Multifunction button
6.6.1.4 Stand-by Mode
When the motor handpiece is not used for a certain period of time, it
enters stand-by mode as described below.
Mode
Device active

Stand-by mode 1

(inactive for 35 s)
Stand-by mode 2
(inactive for 30 min)
29/74
Intermittent sound when:
• The device is rotating in reverse.
• The torque measured is about 75% over the defined
torque.
Intermittent sound when:
• The instrument is subject to increased friction,
• After switching to forward rotation.
• One short beep when the battery charge level is low.
• Three-second beep when the battery charge level is
critical.
A short beep when pressing the button.
A short beep when pressing the button.
LED description
All LEDs ON.
All LEDs ON.
Motor START/
STOP button
blinking blue
every 3 s.
All LEDs OFF.
Description
Application
display
®
Bluetooth ON,
device visible on
status bar.
®
Bluetooth ON,
device visible on
status bar.
®
Bluetooth OFF,
device not visible
on status bar.
B EN XSIQ DFU MAS / Rev.10 / 01-2017
Wake-up action
None.
(Device ready to
be used).
Pick-up the motor
handpiece.
Press the
multifunction
button.