Table of Contents
Advertisement
Main Directions For Use
6.2
Changing the Contra Angle
•
The contra angle can be connected
with the motor handpiece at 6
adjustable head positions. Align the
positioning pins of the contra angle
head with the positioning slots of
the motor handpiece and insert the
head until they click.
•
When removing the contra angle
head, pull it out axially (see
CAUTION
•
When attaching and detaching the contra angle head, turn the
power off beforehand.
•
Check that the contra angle head is securely assembled to the
motor handpiece.
6.3
Mounting and Removing File
•
Insert the file into the chuck until it
stops.
•
Lightly turn the file until it engages
with the latch mechanism. Push
inwards to click.
- File Removal:
Depress the push-button and pull
out the file.
B EN XS00 DFU WEB / Rev.08 / 01-2018 (Old ZF 190270.EN)
Contra Angle
Fig.
7).
Motor Handpiece
Fig. 7
Fig. 8
21/48
Advertisement
Table of Contents
