Battery Care; Inserting And Removing The File; Inserting The File - Dentsply Sirona X-Smart IQ User Manual

Hide thumbs Also See for X-Smart IQ:
Table of Contents

Advertisement

Step by Step Instructions
6.6.1.5

Battery Care

Please also follow the charging instructions in the section 6.8 Storing
and charging the Motor Handpiece and heed the warnings in the
Battery section in chapter 3 Warnings.
Please charge the motor handpiece fully before using for the first time
(about 6 hours) to optimize battery life.
The following notes will help you to ensure the battery provides a long
service life:
If the battery LED on the motor handpiece lights up red, charge the
battery. You can continue treatment whilst it is charging.
Charge the battery no more than once a day.
Charge the battery as soon as the battery LED turns red, at the
latest when the LED starts blinking red.
Always fully charge the battery, i.e until the battery LED turns
green.
If the battery is completely flat, charging can take up to six hours.
Continuous operation with the charger connected shortens the
lifetime of the battery. Dentsply Sirona recommends working
without the charging cable connected.
6.6.2

Inserting and removing the File

6.6.2.1

Inserting the File

A
Insert the file (
Turn the file (
B
inwards to click.
C
Pull on the file (
B EN XSIQ DFU MAS / Rev.10 / 01-2017
1
) into the chuck (
1
) gently until it engages with the latch mechanism. Push
1
) gently to make sure it is locked.
Action
2
) until it stops.
30/74

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents