Recharging The Battery - Dentsply Sirona Propex Pixi User Manual

Step-by-Step Instructions
6.3

Recharging the Battery

Propex Pixi
When the battery is low,
of the device indicating that the battery requires
When the battery icon is blinking, the battery requires recharging.
However, it is still functional for several treatments before the device
shuts down.
Procedure for recharging the battery:
1. Complete the measurements and disconnect the measurement
cable from the patient;
2. Unplug
3. Connect the charger cable to Propex Pixi
4. Connect the charger to the mains. While charging, the charger and
the device should be outside patient environment (at least 1.5 m
from the patient).
During battery charging the battery symbol will first blink (see
then will remain steady when charging is completed (see
Duration of charging: Approximately 12 hours (24 hours after long
period of non-use).
Note
Propex Pixi
END-IFU-PROPEX-PIXI-V15- WEB-EUR-Multilingual -2020-11
®
is equipped with a rechargeable battery.
blinking battery icon appears on the status bar
the measurement cable
Fig. 3 Charging
®
cannot be used while charging.
recharging.
from the device;
®
;
Fig. 4 Full
Fig. 3),
Fig. 4).
13/222