Connecting External Speakers; Connecting To The Front Connector Panel; Viewing A Connected Computer Or Other Device's Input - SMART Board SBID-MX265 Installation And Maintenance Manual

CHAPTER 3
CONNECTING POWER, CABLES AND DEVICES

Connecting to the front connector panel

In addition to the three sets of video connectors on the side and
bottom connector panel, there is one set of computer
connectors on the front control panel:
HDMI 3: This set of connectors can accommodate a
l
USB cable for touch control and an HDMI cable for video
and audio. This input supports HDMI 1.4 with HDCP 1.4.
USB Type-B: This connector can accommodate a USB
l
cable for touch control for computers connected to HDMI
3.

Viewing a connected computer or other device's input

Users can tap the Input button to open the input selection menu. Tap an input source to view the
computer or other device's input on the display.
For information about viewing a connecteds device's input, see the SMART Board MX series
interactive display user's guide (smarttech.com/kb/171284).

Connecting external speakers

The display includes two 10 W speakers, which are designed to provide sound at the front of a
room. You can connect external active speakers if you're providing sound in a larger space. See
SMART Audio 400 classroom amplification system on page 7 for more information.
You can connect external speakers to the display using the stereo
3.5 mm out connector (pictured).
23 smarttech.com/kb/171257