Viewing The Ops Pc Module Input; Connecting External Displays - SMART Board SBID-6265S-P User Manual

CHAPTER 4
CONNECTING COMPUTERS AND OTHER DEVICES
TIP
You can install the SMART software that is included with the display on the OPS PC. For more
information on installing software, see Installing and using SMART software on page 27.

Viewing the OPS PC module input

To view the OPS PC module input
1. Do one of the following:
If iQ is enabled
Tap the Home button
screen, and then tap Input
OR
Press the Input button
control.
A screen appears, showing thumbnails of the inputs connected to the display, including the
OPS PC module.
TIP
If iQ is disabled and you want the OPS PC module's input to appear whenever you wake up
the display, tap the star in the upper-left corner of the OPS PC module's thumbnail.
2. Tap the OPS PC module input.

Connecting external displays

You can connect an external display to duplicate or extend the OPS PC module's desktop.
For more information, see the SMART Board 6000S and 6000S Pro series interactive displays
installation and maintenance guide (smarttech.com/kb/171414).
Connecting USB drives, peripherals, and other
devices
The display includes two USB 3.0 Type-A receptacles on the convenience panel and one USB 3.0
Type-A receptacle on the connector panel. You can connect USB drives, peripherals (such as
keyboards), and other devices to these connectors and use the devices with the iQ experience,
connected computers, and devices installed in the accessory slot (such as the SMART OPS PC).
32 smarttech.com/kb/171415
If iQ is disabled
below the Tap the Home button
screen.
.
OR
Press the Home button
on the remote
button
below the
or the Input
on the remote control.