Update; Recovery - SMART Board SBID-MX265 Installation And Maintenance Manual

CHAPTER B
ADJUSTING DISPLAY SETTINGS
Option
Power saving mode

Update

Option
Firmware version
Update

Recovery

Option
Restore user settings
Restore factory settings
64 smarttech.com/kb/171257
Values Function
Enable Turns on or turns off power saving
mode
Disable
Values Function
[N/A] Shows technical information about
the display's scalar firmware.
[N/A] Checks for updates to the system
software
Values Function
[N/A] Resets any options the user may
have changed
[N/A] Resets all options to their default
values
Notes
Enabled by default.
When enabled, power saving mode
activates after 90 minutes of
inactivity.
Enabling Power saving mode
makes RS-232 control of the display
unavailable until the display is
turned on using the power button
on the front control panel .
Notes
To see the firmware version use
the About option (see About on the
facing page.
If an update is available, the text
changes to Apply update now.
NOTE
The display must be connected
to the Internet to check for
system software updates. Check
the display's network settings.
To check the network settings,
see Network on page 61.
Notes
[N/A]
Only administrators should reset
the display.