Connecting An External Display; Connecting An External Audio System - SMART Board SBID-MX255-V4 Installation And Maintenance Manual

Chapter 3 Connecting computers and other devices
Input source
HDMI 1
HDMI 2
HDMI 3
VGA
Accessory slot
OPS PC

Connecting an external display

You can connect an external display to SMART Board MX (V2 and V2-C) series
displays using the HDMI 2.0 out connector on the connector panel (pictured).
The external display will show the same image. This is useful when you're
using the display in an auditorium or other large space where it would be
beneficial to have a second display.
Note
SMART Board MX (V3N) series displays do not include an HDMI Out connector.
Important
If the connected external display doesn't support HDCP, the image on the external display is limited to
480p resolution. For full resolution output, connect a display that supports HDCP.

Connecting an external audio system

The display includes two speakers, which are designed to provide sound at the front of a room. You
might want to connect an external audio system if you're providing sound in a larger space.
You can connect an external audio system to the display using the stereo 3.5 mm out connector
(pictured). This disables the display's internal speakers. Alternatively, you can connect an external audio
system directly to a room computer.
3
Located on the side connector panels of SMART Board MX (V2, V2-C, V3, and V4) series displays
4
Located on the front connector panels of all displays and on the side connector panel of SMART Board MX series displays
smarttech.com/kb/171555
USB 3.0 Type-A receptacle
(SuperSpeed)
(SuperSpeed)
(SuperSpeed)
(SuperSpeed)
(SuperSpeed)
(SuperSpeed)
3 USB 2.0 Type-A receptacle
(Hi-Speed)
(Hi-Speed)
(Hi-Speed)
(Hi-Speed)
(Hi-Speed)
(Hi-Speed)
4
45