Applying The Display's Firmware Update Manually; Updating System Software Manually - SMART Board SBID-MX265 Installation And Maintenance Manual

CHAPTER 8
TROUBLESHOOTING
To make sure the network is configured properly for firmware updates, see Chapter 4: Configuring
the network on page 29.

Applying the display's firmware update manually

To apply a system software update
1. A dialog box appears on the screen asking if you want to update the display's firmware.
2. Tap Update to update the display's firmware.
OR
Tap Cancel to update the display's firmware at a later time.
To apply an automatic system software update manually
1. On the display, press the Menu
2. Tap Update.
3. Under Update, tap Update.

Updating system software manually

You can download system software updates at
using a USB drive.
1. Go to smarttech.com/downloads
2. Copy the .zip file to a USB drive.
3. Insert the USB drive into the display USB.
4. Press Menu on the front control panel to open the display's settings.
5. Tap Update.
6. Tap Check.
A dialog box appears.
7. Tap USB.
51 smarttech.com/kb/171257
button on the front control panel.
smarttech.com/downloads
and download the update file for your size of display.
and update your display