Chapter 3: Connecting Power, Cables And Devices - SMART Board SBID-MX265 Installation And Maintenance Manual

Chapter 3
Connecting power, cables and
devices
Connecting the iQ appliance
Connecting power
Connecting to a network
Connecting cables for room computers, guest laptops and other input sources
Using recommended cables
Connecting to the side connector panel
Connecting to the bottom connector panel
Connecting to the front connector panel
Viewing a connected computer or other device's input
Connecting external speakers
Connecting room control systems
Connector reference
Side connector panel
Bottom connector panel
Front connector panel
iQ appliance
Other connectors
Connect the display to power after you install it but before you turn it on for the first time. You can
also connect cables for room computers, guest laptops or other input sources as well as for
speakers and room control systems.
By installing cables in advance, you make use of connectors that might not be accessible after the
display is wall-mounted. You can then run the cables across floors or behind walls as needed.
WARNING
Ensure that any cables that cross the floor to the display are properly bundled and marked to
avoid a trip hazard.
19 smarttech.com/kb/171257
20
20
20
21
21
22
22
23
23
23
24
25
25
26
27
27
28