Table of Contents
Advertisement
Chapter 3: Entering Debugger Commands
Using Menus, the Entry Buffer, and Action Keys
If you decide not to select a menu item, simply continue to hold the mouse
button down, move the mouse pointer off of the menu, and release the mouse
button.
Some menu items have an ellipsis ("...") as part of the menu label. An ellipsis
indicates that the menu item will display a dialog or message box when the
menu item is chosen.
Note
The command select button can be either the left or right button, depending
on the computer you are using. The "Getting Started with the Graphical
Interface" chapter has a table which explains which button to use.
To choose a pull-down menu item using the
mouse (method 2)
1 Position the mouse pointer over the menu name on the menu bar.
2 Click the command select mouse button to display the menu.
3 Move the mouse pointer to the desired menu item. If the menu item has a
cascade menu (identified by an arrow on the right edge of the menu button),
then repeat the previous step and then this step until you find the desired item.
4 Click the mouse button to select the item.
If you decide not to select a menu item, simply move the mouse pointer off of
the menu and click the mouse button.
Some menu items have an ellipsis ("...") as part of the menu label. An ellipsis
indicates that the menu item will display a dialog or other box when the menu
item is chosen.
60
Advertisement
Table of Contents
