Table of Contents
Advertisement
Chapter 9: Configuring the Debugger
Setting the General Debugger Options
To specify demand loading of symbols
• Using the command line, enter:
Debugger Option General Demand_Load
Select On or oFF, and press the < Return> key.
On
oFF
To select the interpretation of numeric literals
(decimal/hexadecimal)
• In the Debugger Options dialog box, hold the command select mouse button
down on the button for "Input Radix" or "Output Radix". Release the button
to select "Decimal" or "Hex".
Or:
• Using the command line, enter:
Debugger Option General Radix
Select Decimal or Hex, and press the < Return> key.
If you select Hex, any number you want interpreted as decimal must be
terminated with a T (for example, specify 32 as 32T).
Binary numbers are not available when you select Hex.
Floating point and enumeration type values are not affected.
252
Symbol information is loaded on an as-needed basis.
All symbol information is loaded.
Advertisement
Table of Contents
