HP B1476 68020 User Manual page 539

Command Parameters
Definition of the Window New command parameters are as follows:
Parameter
< user_window_nmbr>
< user_screen_nmbr>
< top row>
< left col>
< bottom row>
< right col>
N is the number of rows or columns on your display. The value of N is dependent on display type.
Note
The Window New command will fail if row or column coordinates are greater
than the screen boundary. For example, the command Window New 15
Assembly 36,1,39,80 will fail if you have an 80 column by 40 row screen. The
command Window New 15 Assembly 36,0,39,79 will work.
Alternate Window Views
To create alternate views of a user-defined window, follow the procedure
outlined below.
1
2
3
See Also
Definition
Window number
User_Screen
Upper row coordinate
Left column coordinate
Lower row coordinate
Right column coordinate
Execute the Window New command to define a window with specific size
parameters.
Execute the Window Toggle_View command, or press function key F4.
Execute the Window Resize command to redefine the previously
defined window with new size parameters. The new size parameters must
be smaller than the previously assigned parameters.
Expression Fprintf
File User_Fopen
Window Active
Window Cursor
Window Delete
Window Erase
Window Resize
Chapter 12:
Window New
Range
50 to 256 inclusive
4 to 256 inclusive
0 to N-1 inclusive
0 to N-1 inclusive
0 to N-1 inclusive
0 to N-1 inclusive
515