Table of Contents
Advertisement
Chapter 3: Entering Debugger Commands
Using the Command Line with the Mouse
To edit the command line using the command line
pushbuttons
• To clear the command line, click the Clear pushbutton.
• To clear the command line from the cursor position to the end of the line,
click the Clear to end pushbutton.
• To move to the right one command word or token, click the Forward
pushbutton.
• To move to the left one command word or token, click the Backup pushbutton.
• To insert characters at the cursor position, press the Insert char key to change
to insertion mode, and then type the characters to be inserted.
• To delete characters to the left of the cursor position, press the < Backspace>
key.
When the cursor arrives at the beginning of a command word or token, the
softkey labels change to display the possible choices at that level of the
command.
When moving by words left or right, the Forward pushbutton becomes
half-toned and unresponsive when the cursor reaches the end of the command
string. Similarly, the Backup pushbutton becomes half-toned and
unresponsive when the cursor reaches the beginning of the command.
See "To edit the command line using the mouse and the command line pop-up
menu" and "To edit the command line using the keyboard" for information
about additional editing operations you can perform.
76
Advertisement
Table of Contents
