Table of Contents
Advertisement
Function Key Commands
You can enter commonly used commands quickly and easily by pressing the
function keys F1 through F8 on your keyboard. Function keys can be used in
the graphical interface as well as the standard interface. The following table
and figure describe the commands associated with the function keys.
If you are using the debugger on a Sun SPARCsystem, refer to the
"Installation" chapter for information on mapping function keys.
Function Key Commands
Function
Menu Equivalent,
Key
Command Line Equivalent
Display→Next Window,
F1
Window Active Next
Display→Previous Window,
F2
Window Active Previous
Settings→High Level Debug or
F3
Settings→Assembly Level Debug,
Debugger Level
Right click on active window border,
F4
Window Toggle_View
Help→Command Line...,
F5
Debugger ? (Help)
Display→Simulated I/O,
F6
Window Screen_On Next
Execution→Step Instruction→from PC,
F7
Program Step
Execution→Step Source→from PC,
F8
Program Step Over
Chapter 3: Entering Debugger Commands
Description
Activate the next higher numbered window.
Activate the next lower numbered window.
Switch between assembly-level and
high-level mode.
Select the alternate display of the active
window.
Access on-line help.
Access the standard I/O screen. Also access
any existing user-defined screens.
Execute one C source line (high-level
mode), or execute one microprocessor
instruction (assembly-level mode).
Execute one C source line, but treat whole
functions as a single line (high-level mode);
execute one microprocessor instruction, but
treat whole subroutines as a single
instruction.
57
Advertisement
Table of Contents
