To Edit The Command Line; To Recall Commands Using The Command Line Recall Feature - HP B1476 68020 User Manual

To edit the command line

• To clear the command line, press < Ctrl> U.
• To clear the command line from the cursor position to the end of the line,
press < Ctrl> E.
• To move to the right one command word, press < Tab> .
• To move left or right character-by-character, press the ← and → keys.
• To delete characters to the left of the cursor position, press the
< BACKSPACE> key.
When the cursor arrives at the beginning of a command word or token, the
softkey labels change to display the possible choices at that level of the
command.
To recall commands using the command line
recall feature
• To recall commands from the command line, press the < Ctrl> R key
combination. Continue to press < Ctrl> R to move from the most recently
executed commands backward to earlier commands.
• To move forward in the recall list, press < Ctrl> B.
The command line recall feature is available to you, but it is not as easy to use
or as flexible as the Command Recall dialog box in the graphical interface.
You must search through commands in a linear fashion instead of going
directly to the command you want in the dialog box. The depth of the recall
list is predefined and cannot be controlled by you. The recall list may contain
duplicate entries that you must scroll past and that take up room in the recall
Chapter 3: Entering Debugger Commands
Using the Command Line with the Keyboard
81