Table of Contents
Advertisement
To answer a configuration question, click the softkey pushbutton that has your
answer. Or, click on the "Return" command pushbutton to accept the answer
that is shown.
When you answer a configuration question, you are normally presented with
the next question in the section; however, there are some cases when a
carriage return is required, and you can supply it by clicking the Return
command pushbutton or by pressing the < Return> key.
At the last question of a configuration section, you are asked if you wish to
return to the main menu. You can click the "next_sec" softkey pushbutton to
access the questions in the next configuration section.
To recall a configuration question, click the RECALL softkey pushbutton. If
you do this at the starting question of a configuration section, you are asked if
you want to return to the main menu.
In order for the emulator to recognize any configuration changes, the
configuration must be stored.
To store a configuration
• When answering the configuration questions, choose File→Store... from the
pull-down menu, and use the File Selection dialog box to name the
configuration file.
• From the Emulator Configuration dialog box main menu, click on the "Store"
button, and use the File Selection dialog box to name the configuration file.
The file to which the configuration is stored becomes the current
configuration file. The emulator only recognizes configuration changes when
they are stored or loaded.
When modifying a configuration, you can choose to store your answers at any
time.
For more information on how to use dialog boxes, refer to the "To use dialog
boxes" description in the "Entering Commands" chapter.
Chapter 10: Configuring the Emulator
287
Advertisement
Table of Contents
