2 Select Execution→Run→from ().
Or:
• Using the command line, enter:
Program Run From <start_addr>
Type in the start address, and press the < Return> key.
The program runs until:
•
The program encounters a permanent or temporary breakpoint.
•
An error occurs.
•
A STOP instruction is encountered.
•
You press < Ctrl> -C.
•
The program terminates normally.
Running from a start address in high-level mode may cause unpredictable
results if the compiler startup routine is bypassed.
To run until a stop (break) address
1 Enter the stop address into the entry buffer.
2 Select Execution→Run→until () or click on the Run Til () action key.
Or:
• Using the command line, enter:
Program Run Until <break_addr>
Type in the stop address and, optionally, a pass count, and press the
< Return> key.
Chapter 4: Loading and Executing Programs
Stepping Through and Running Programs
103