Chapter 12:
Window New
Window New
The Window New command makes (creates) new windows and screens. It may
also be used to move existing windows to a new location within a screen.
Windows must be assigned a number between 50 and 256 inclusive. Numbers 1
through 49 are reserved for predefined debugger windows. The bounds
parameter specifies both the window size and location on the screen.
Window coordinates 0,0 correspond with the upper-left corner of the screen.
Note
When making new window, be careful not to enter coordinates that will result
in a window that will cover the status line and command line.
On a standard 80-column by 24-row terminal display, a row coordinate may be
between 0 and 23. However, creating a window whose bottom row coordinate
is greater than 18 will cause part or all of the status line to be covered.
514