Table of Contents
Advertisement
Chapter 8: Using Macros and Command Files
Using Command Files
To stop command recording
• Select File→Log→Stop Command Recording.
Or:
• Using the command line, enter:
File Log oFF
And press the < Return> key.
The command file is closed.
To run a command file
• Use the -c command_file option to the db68k command when starting the
debugger. (The command_file must end with the .com extension.)
$ db68k -e <emulator_id> -c <command_file> <RETURN>
Or:
• Select File→Log→Playback. Using the file selection dialog box, enter the name
of the command file, and click on the OK pushbutton.
Or:
• Using the command line, enter:
File Command
Enter the name of the command file from which debugger commands will be
executed, and press the < Return> key.
240
Advertisement
Table of Contents
