To Load A Configuration File - HP B1476 68020 User Manual

Chapter 10: Configuring the Emulator

To load a configuration file

• Use the -C command line option when starting the debugger.
Or:
• Use a default configuration file.
Or:
• Select File→Load→Emulator Config.
Or:
• Using the command line, enter
Debugger Execution Environment Load_Config
The emulation configuration file contains configuration information for the
emulator. The debugger/emulator accepts files generated by the emulation
software or by an editor. The debugger uses the .EA suffixed file (ASCII
format) to load emulator configurations.
If you do not specify a configuration file (no -C option is given) and the
emulator is locked at startup, the configuration saved when you left the
emulator locked is used. No default configuration is loaded.
If you do not specify the -C option and the emulator is not locked, the
debugger searches for a default configuration file in the following sequence:
1
2
3
4
290
configuration file default.EA in the current directory.
configuration file default.EA in the $HOME directory.
configuration file /usr/hp64000/inst/emul/64748A/userconfig.EA or
/usr/hp64000/inst/emul/64747A/userconfig.EA.
configuration file /usr/hp64000/inst/emul/64748A/default.EA or
/usr/hp64000/inst/emul/64747A/default.EA provided with the emulator.