Table of Contents
Advertisement
Saving and Loading the Debugger Configuration
Information regarding debugger options and screen configurations can be
saved in a startup file. Startup files can be created only from within the
debugger.
This section shows you how to:
•
Save the current debugger configuration.
•
Load a startup file.
To save the current debugger configuration
• Use the menu select mouse button to choose File→Store→Startup (.rc) file
(as default). The information is saved in file "db68k.rc" (for 68020 debug
sessions) or file "db68030.rc" (for 68030 debug sessions) in the current
directory.
Or:
• Use the menu select mouse button to choose File→Store→Startup (.rc) file.
Using the file selection dialog box, enter the name of the file to which startup
information should be saved; then, click on the OK pushbutton.
Or:
• Using the command line, enter:
File Startup <startup_file>
Enter the name of the file in which the startup information should be saved,
and press the < Return> key. If you do not specify the name of the startup file,
the default value will be used.
This command also saves the window and screen settings.
Chapter 9: Configuring the Debugger
Saving and Loading the Debugger Configuration
267
Advertisement
Table of Contents
