Debugger Quit - HP B1476 68020 User Manual

Chapter 12: Debugger Commands

Debugger Quit

Debugger Quit
The Debugger Quit command ends a debugging session without saving the
session. If you enter the command Debugger Quit Yes , the debugging
session is immediately ended.
The Debugger Quit command does not save the debugging session. Use the
File Startup command to save the current set of debugger startup options and
window parameters in a startup file.
Yes Option
The Yes option terminates only this interface to the emulator. If this is the
only interface using the emulator, the emulator will be left locked.
Locked Option
The Locked option lets you lock the emulation hardware (and a connected
target system) so that other users cannot access the hardware until it is
explicitly released.
This option will cause all interfaces connected to the emulator to disconnect.
Released Option
The Released option releases the emulation hardware to other users on the
host computer system.
This option will cause all interfaces connected to the emulator to disconnect.
See Also
Debugger Host_Shell
397