How to use this device
52/92
12.13
What to do after the treatment
12.13.1
Cleaning and disinfection
Infections can be transferred through skin contact.
All items/equipment components, with which the user can
come into contact during the application, must be cleaned
and disinfected after every session:
–
Protective goggles
–
Floor mat (silicone)
–
Entry area
–
Acrylic panels
–
Handles and control panel
–
MP3 cable
–
Use only EPA registered quaternary ammonium germi-
cidal based detergent solution (follow product label for
use-dilution), such as Lucasol One Step, to clean and
disinfect the beauty system and its components.
NOTE:
For thorough cleaning and disinfection, the product must be
allowed to remain in contact with the surface being cleaned
and disinfected for a specified amount of time.
This specified amount of time depends on the cleaner/
disinfectant which is used. Follow the directions for use of the
cleaner/disinfectant.
After this specified application time remove remaining clean-
er/disinfectant from the surfaces of the device. Use a single-
pass paper towel.
WARNING!