Table of Contents
Advertisement
Integrated circuits on computer boards are sensitive to static
electricity.
To
avoid
discharge, observe the following precautions:
Do not remove boards or integrated circuits from their anti-static
packaging until you are ready to install them.
Before handling a board or integrated circuit, touch an unpainted
portion of the system unit chassis for a few seconds. This helps to
discharge any static electricity on your body.
Wear a wrist-grounding strap, available from most electronic
component stores, when handling boards and components.
Trademarks Acknowledgments
AXIOMTEK is a trademark of AXIOMTEK Co., Ltd.
IBM is a registered trademark of International Business
Machines Corporation.
MS-DOS, and Windows '95/98/NT/2000 are trademarks of
Microsoft Corporation.
Award is a trademark of Award Software, Inc.
IBM, PC/AT, PS/2, VGA are trademarks of International
Business Machines Corporation.
Intel, Pentium, Pentium II, Pentium III and Celeron are
trademarks of Intel Corporation.
C&T is a trademark of Chips and Technologies, Inc.
Realtek
RT8100C
Semiconductor Corporation.
Other brand names and trademarks are the properties and
registered brands of their respective owners.
ESD Precautions
damaging
chips
are
registered
trademark
from
electrostatic
of
Realtek
iii
Advertisement
Table of Contents
Need help?
Do you have a question about the SBC82400 and is the answer not in the manual?
Questions and answers