Table of Contents
Advertisement
Restore Program from the SD Card
CAUTION: Memory allocation must be set the same as the saved program. Be
sure to print out the memory allocation so that it can be re-entered before restoring
the program.
Saving Reports to an SD Card
The SD card can also be used to save reports. Reports saved are the current X1 readings.
SD Report Notes
96 • Service Mode Programming
1. Set the store name to match the name of the store folder you wish to restore.
2. Insert the SD card in the register's SD slot.
3. Move to the SERVICE MODE.
4. From the Service Mode menu , select "7.PROGRAM BACKUP".
5. From the PROGRAM BACKUP menu select "1.SD".
6. From the SD menu select "2.PGM RESTORE".
7. The register will display confirmation of the successful restoration with the
message "SUCCESS !". If the save is unsuccessful, the register will print an
error message.
1. When backing up and restoring data, the store name must be programmed on
page 143 of "Store Name" in the "SYSTEM" of "Options Programming".
The default store name is "STORE001".
2. The ER-260EJ will write the program files to folder. For example:
ER-260EJ/STORENAME/SALEBACK/CSVBACK/DATE/TIME or
ER-260EJ/STORENAME/SALEBACK/REPBACK/DATE/TIME or
The date folder depends on date format option. See "SYSTEM" of "Options
Programming" in the "Program Mode Programming" chapter to set DATE
FORMAT.
DATE FORMAT
YYMMDD
DDMMYY
MMDDYY
3. Each individual report is named with the time of the report. For example
"CLK02332" represents a Clerk report taken at 23:32 (in a 24-hour time
format.) In this manner, multiple reports backed up at different times in the
same day will collect in the same "date" folder.
DATE FOLDER NAME
20140403
03042014
04032014
SAM4S ER-260EJ Manual
Advertisement
Table of Contents
