Table of Contents
Advertisement
CHECK ENDORSEMENT
CHECK ENDORSEMENT Key Program Notes
Option
DESC
KEY DISABLE
UNDER
MANAGER
CONTROL
PRINT CHECK
AMT IN THE
ENDORSEMENT
PRINT DATE
PRINT TIME
PRINT CLERK
PRINT
CONSECUTIVE
No
SLIP OUTPUT
PORT#(0-3)
132 • Program Mode Programming
Entry
Description
Alpha
You can program a unique descriptor. The default
numeric
descriptor is CHKENDOR.
24
character
Y or N
Select Y to disable this function.
Y or N
Select Y if you do not want the operator use this function in
REGISTER MODE. When selected, the function is
allowed only in the MANAGER MODE.
Y or N
Choose Y to print the amount of check as well as the
endorsement message. Choose N to print only the
endorsement message.
Note: A 10 line check endorsement message may be
programmed. See "Endorsement" on page 164 for more
information.
Y or N
Select N to suppress printing Date on the check
endorsement.
Y or N
Select N to suppress printing Time on the check
endorsement.
Y or N
Select N to suppress printing the Clerk name on the check
endorsement.
Y or N
Select N to suppress printing the Consecutive number on the
check endorsement.
0-3
If validation is used, identify the communications port (1 or
3) where the validating printer is attached. Enter 0 if
validation is not used.
SAM4S ER-260EJ Manual
Advertisement
Table of Contents
