Maintenance; Cleaning; Cleaning The Lcd Monitor/Video Display - Siemens MAGNETOM Skyra fit Operator's Manual

MAGNETOM Skyra fit | syngo MR E11
Print No. M6-04401.621.02.02.02
6

Maintenance

6.1

Cleaning

All instructions in the operator manual regarding cleaning and, when
applicable, regarding disinfecting and sterilization must be always
observed.
 WARNING
Improper cleaning of the MR system!
Risk of electric shock
◆ Only clean the MR system with a damp cloth.
For information regarding cleaning of RF coils, see:
Coils

Cleaning the LCD monitor/video display

6.1.1
The LCD monitor of the syngo Acquisition Workplace and the video
display are cleaned in the same way.
1 Clean the LCD monitor/video display at least every two months.
2 Prior to cleaning, switch off the LCD monitor/video display and
disconnect the main power plug. But if the monitor/display is under
hot running conditions, please wait till the monitor/display is
chilled (this can take up to one hour).
3 Clean the monitor/video display using a microfiber cloth.
4 If the LCD monitor/video display cannot be effectively cleaned with
the microfiber cloth: use window cleaner. Do not use window
cleaner on the monitor housing.
5 Immediately remove any water drops from the LCD monitor/video
display.
6 Avoid scratching the surface area of the LCD monitor/video display.
7 Avoid impacts to the LCD monitor/video display.
Maintenance
Operator Manual
6
117