Operating The Dot Display; Patient Table; Description - Siemens MAGNETOM Skyra fit Operator's Manual

MAGNETOM Skyra fit | syngo MR E11
Print No. M6-04401.621.02.02.02

Operating the Dot display

3.3.2
To operate the Dot display, use the jogwheel of the smaller control
unit. ( Page 54 Control units)
1 Turn the jogwheel to navigate through the icons.
2 Press the jogwheel to confirm the selection.
3 If necessary, adjust your settings by turning and pressing the
jogwheel.
3.4

Patient table

3.4.1

Description

The patient table is used for positioning the patient and the coils. The
table comprises several sockets and connections.
MR system components 3
57