Msi Code - Microscan MS-1 Integration Manual

MSI Code

Status (MSI Code)
Usage: Used for inventory control and the identification of storage containers and
locations in warehouse environments.
Definition: MSI Code is a numeric, continuous symbology in which each character
consists of four bits in a binary format.
Serial Cmd: <K486,status,check character mode,check character output status,
0,minimum symbol length>
Default: Disabled
Options: 0 = Disabled
Check Character Mode (MSI Code)
Definition: This field is set to perform a Modulus 10 calculation by default. It can also
be set to perform a Double Modulus 10 calculation.
Serial Cmd: <K486,status,check character
0,minimum symbol length>
Default: Modulus 10
Options: 1 = Modulus 10
Check Character Output Status (MSI Code)
Definition: When this field is enabled, the MS-1 will output the check digit with symbol
data. When disabled, the MS-1 will not output the check digit with symbol
data.
Serial Cmd: <K486,status,check character
0,minimum symbol length>
Default: Disabled
Options: 0 = Disabled
Minimum Symbol Length (MSI Code)
Definition: This field specifies the minimum number of characters the MS-1 will recognize,
including a check character.
Serial Cmd: <K486,status,check character mode,check character output status,
0,minimum symbol
Default: 6
Options: 0 to 32
MS-1 Scan Engine Integration Manual
1 = Enabled
mode,check character output status,
2 = Double Modulus 10
mode,check character output
1 = Enabled
length>
Symbologies
status,
7-13