Differences From Default - Microscan MS-1 Integration Manual

Differences from Default

Clicking the Differences from Default button will cause ESP to check all stored configuration
settings and compare them to default settings. All settings that are different than default
will appear in the left column (shown below), and descriptions of those settings will appear
in the right column.
Click this button for a list of ESP
configuration settings that are
different than default settings.
Click Save As to save the
report as plain text or a
tab-delimited text file.
• To save the Differences from Default report, either as plain text or as a tab-delimited
text file, click Save As.
• Click Send and Save to send the settings to the MS-1 and save them, or Send to
Reader to send the settings without saving them.
Important: The use the Differences from Default feature, you must connect to the
MS-1 and Receive Reader Settings via the Send/Recv button on the toolbar.
MS-1 Scan Engine Integration Manual
Send configuration settings to the
MS-1 and save in ESP by clicking
Send and Save.
Send configuration settings
to the MS-1 without saving
by clicking Send to Reader.
Utilities
9-3