Table of Contents
Advertisement
Number of Symbols
Usage:
Commonly used in shipping applications where an object contains individual
symbols for part number, quantity, and other values.
Definition:
This feature allows one trigger event to decode all symbols present.
Conditions:
The following conditions apply:
• When Number of Symbols is set to Single, the read cycle ends when
• When Number of Symbols is set to Multiple, all decoded symbol data
• If set to Multiple and Time Between Identical Decodes is less than
Number of Symbols
Definition:
Number of Symbols is the number of different symbols that can be read in
a single read cycle.
Serial Cmd:
<K222,number of
Default:
1
Options:
0 = Multiple
1 = Single
MS-1 Scan Engine Integration Manual
one symbol is decoded and output.
(for both the same and different symbols) is output while the read cycle
is active and/or no timeout has occurred.
the decode time (typically about 4ms), the same symbol data can be
output multiple times.
symbols>
Read Cycle
6-5
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the MS-1 and is the answer not in the manual?
Questions and answers