Step 5 Autoconnect - Microscan MS-1 Integration Manual

Autoconnect
Step 5 — Autoconnect
• Click Start when the Autoconnect dialog appears.
• If your communications port is not the default COM1, use the dropdown menu to change
your port.
• Once you have chosen
the correct port, click
Start to connect.
When you are connected, you will see the green connection indicator in the status bar at
the bottom right of your screen:
• If the connection attempt fails, click the Autoconnect button, select a different communications
port, and try again.
Note: If your RS-232 host settings
cannot be changed to match the
MS-1's settings, select Connect
from the Connect dropdown menu
on ESP's menu toolbar. When the
Connection Settings dialog
appears, check the Force Connect
box and click the Connect button.
1-6
MS-1 Scan Engine Integration Manual