Serial Utility Commands - Microscan MS-1 Integration Manual

Serial Utility Commands

Serial Utility Commands
Note: For a list of all K commands, see
Type
Part Number
Device Control
Default/Reset/Save
Reader Status Request
Trigger
9-2
Serial Configuration Commands
Command
<#> Display Firmware Part Number
<H> Enable Reader
<I> Disable Reader (Continuous, external trigger)
<A> Reset (does not save for power-on)
<Z> Save Current Settings for Power-On
Recall Microscan Default Parameters and
<Zrd>
Save for Power-On
<K?> Configuration Command Status
<char> Serial Trigger Character
on page A-6.
Name
MS-1 Scan Engine Integration Manual