D-Link DES-3326SR User Manual page 249

DES-3326SR Layer 3 Fast Ethernet Switch User's Guide
The following fields can be set:
Parameter Description
Interface Name
<System>
IP Address
Version <2>
Query Interval
<125>
Max Response
Time <10>
Robustness
Variable <2>
Displays the name of the IP interface
that is to be configured for IGMP.
This must be a previously configured
IP interface.
Displays the IP
corresponding to the IP interface
name above.
Enter the IGMP version (1 or 2) that
will be used to interpret IGMP
queries on the interface.
Allows the entry of a value between 1
and 65535 seconds, with a default of
125 seconds. This
length of time between sending IGMP
queries.
Sets the maximum amount of time
allowed before sending an IGMP
response report. A value between 1
and 25 seconds can be entered, with
a default of 10 seconds.
A tuning variable to
subnetworks that are expected to
lose a large number of packets. A
value between 2 and 255 can be
entered, with larger values being
specified for subnetworks that are
expected to lose larger numbers of
237
address
specifies the
allow for