D-Link DES-3326SR User Manual page 268

DES-3326SR Layer 3 Fast Ethernet Switch User's Guide
The following fields can be set:
Parameter Description
IP Address
<0.0.0.0>
Subnet Mask
<0.0.0.0>
Gateway IP
<0.0.0.0>
Metric <1 >
Static ARP
To make a static ARP entry, click the IP Forwarding folder
and then the Static ARP link:
Figure 6 - 87. Static ARP
Allows the entry of an IP address
that will be a static entry into the
switch's Routing Table.
Allows the entry of a subnet mask
corresponding to the IP address
above.
Allows the entry of an IP address of a
gateway for the IP address above.
Allows the entry of a routing protocol
metric representing the number of
routers between the switch and the
IP address above.
256