D-Link DES-3326SR User Manual page 242

DES-3326SR Layer 3 Fast Ethernet Switch User's Guide
To edit an existing Route Redistribution entry on the
switch, select the entry from the Route Redistribution
screen and click on the Edit button:
Figure 6 - 65. Route Redistribution − Edit
The following fields can be set or are displayed:
Parameter Description
Source Protocol
Destination
Protocol
Metric Type
Allows the selection of the protocol of
the source device. Available choices
are RIP, OSPF, or Static.
Allows the selection of the protocol of
the destination device.
choices are RIP and OSPF.
Allows the selection of one of two
methods for calculating the metric
value. Type-1 calculates the metric
(for RIP to OSPF) by adding the
destination's interface cost to the
metric entered in the Metric field.
Type-2 uses the metric entered in the
Metric field without change.
field applies only
destination field is OSPF.
230
Available
This
when the