D-Link DES-3326SR User Manual page 197

DES-3326SR Layer 3 Fast Ethernet Switch User's Guide
Figure 6 - 27.SNMP Group – Add New
Parameter Description
Group Name
Read View Name
Write View Name
Notify View Name
Security Model
Type an alphanumeric string of up to
32 characters. This is used to
identify the new SNMP group of
SNMP users.
This name is used to specify the
SNMP group created can request
SNMP messages.
Specify a SNMP group name for
users that are allowed SNMP write
privileges to the switch's
agent.
Specify a SNMP group name for
users that can receive SNMP trap
messages generated by the switch's
SNMP agent.
Use the pull-down menu to select the
SNMP version. Select one of the
following:
SNMPv1 – Specifies that SNMP
version 1 will be used.
185
SNMP