D-Link DES-3326SR User Manual page 257

DES-3326SR Layer 3 Fast Ethernet Switch User's Guide
not be able to receive UDP data streams unless the UDP
multicast packets were all forwarded to the router port.
•
A router port will be dynamically configured when IGMP
query packets, RIPv2 multicast, DVMRP multicast, PIM-
DM multicast packets are detected flowing into a port.
To setup a static router port:
Click the Static Router Port Settings link under the IP
Multicast Routing Protocols folder:
Figure 6 - 75. Static Router Port Settings
Ports that have been configured as a Static Router Port will be
displayed under the Router Port heading and signified by a
capital M, as shown above (port 8 − M is for Multicast enabled
router).
To add a static router port configuration, click the Edit button
to open the following dialog box:
245