D-Link DES-3326SR User Manual page 78

DES-3326SR Layer 3 Fast Ethernet Switch User's Guide
configured prior to setting up the corresponding IP interface.
An IP addressing scheme must then be established, and
implemented when the IP interfaces are set up on the switch.
An example is presented below:
VLAN Name VID
System (default)
Engineering
Marketing
Finance
Sales
Backbone
Table 5-12. VLAN Example – Assigned Ports
In this case, 6 IP interfaces are required, so a CIDR notation of
10.32.0.0/11 (or a 11-bit) addressing scheme will work. This
addressing scheme
11111111.11100000.00000000.00000000
255.224.0.0 (decimal).
Using a 10.xxx.xxx.xxx IP address notation, the above example
would give 6 network addresses and 6 subnets.
Any IP address from the allowed range of IP addresses for each
subnet can be chosen as an IP address for an IP interface on
the switch.
For this example, we have chosen the next IP address above
the network address:
Switch Ports
1 5, 6, 7, 8, 21, 22, 23, 24
2 9, 10, 11, 12
3 13, 14, 15, 16
4 17, 18, 19, 20
5 1, 2, 3, 4
6 25, 26
will give a subnet
66
mask of
(binary) or