D-Link DES-3326SR User Manual page 294

DES-3326SR Layer 3 Fast Ethernet Switch User's Guide
The following fields can be set:
Parameter Description
Group ID
Master Port <1>
Unit
Port Member
State <Disabled>
Allows the entry of a number used to
identify the link aggregation group −
when adding a new group. Displays
the Group ID of the
selected link aggregation group −
when editing and existing entry.
The Master port of link aggregation
group.
Allows the selection of a particular
switch in a switch stack, if you have
the optional stacking
installed and have
interconnected the switches in the
switch stack.
Allows the specification of the ports
that will make up
aggregation group.
This field can be toggled between
Enabled and Disabled. This is used
to turn a link aggregation group on
or off. This is useful for diagnostics,
to quickly isolate a
intensive network device or to have
an absolute backup link aggregation
group that is not under automatic
control.
282
currently
module
properly
the link
bandwidth