D-Link DES-3326SR User Manual page 300

DES-3326SR Layer 3 Fast Ethernet Switch User's Guide
Configure the following Radius server settings:
Parameter Description
Index
IP Address
Key
AuthPortNumber
AcctPortNumber
802.1X State
To enable 802.1x on the switch select Enabled and click the
Apply button.
Figure 6 - 106. 802.1X State – Enable/Disable
Radius server settings index.
Type in the IP address of the Radius
server.
Type the shared-secret key used by
the Radius server and the switch.
Up to 32 characters can be used.
Type the UDP port number for
authentication requests. The default
is 1812.
Type the UDP port number for
accounting requests (if accounting
server is being used). The default is
1813.
288